Batch Smart quick quote，
Export quotation with one click，
One-click order
Monday to Saturday8:30-18:00
introduction：IKObearing[IKObearing:IKONeedle roller bearing with its special internal structure to achieve the mechanical design of small、Light weight。Guideway bearings are based on the high quality given by needle roller bearings，Precision machining with unique mechanical equipment，Evaluate the quality of the latest machines，Products always maintain high performance and high quality level。]If damaged, disassemble and replace it，Its not just anyones choice, okay，When disassembling and installing imported bearings, professional technicians are required to be present and guided。Dont knock at random，Otherwise it will cause unnecessary losses to the machinery and equipment。How about a brief introduction
2015-03-04 Reading quantity 1530
introduction：A molding material used in casting to prepare molding sand and core sand。In the case of using clay as the binder for molding sand﹐Per production1Ton qualified casting﹐Approximately need to supplement1tonneite﹐Therefore, the amount of casting sand is the largest in sand casting production。 Brief history China in AD17Silica sand has been used as a molding material for centuries﹐clock-making﹑mirror﹑Castings such as POTS and guns。But the early use of natural clay containing silica sand namely mountain sand and river sand﹐It has good plasticity﹐Can be directly used to manufacture molds and cores﹐Suitable for the conditions of manual production at that time。After entering the factory mass production﹐Especially when the molding is mechanized﹐
2015-03-04 Reading quantity 2793
introduction： 1、IKOImported bearing[Imported bearing:Simply put, the import bearing agent refers to the sale of an imported bearing brand。The main brands of imported bearings arenskbearing，ikobearing，fagbearing，Of good quality，Of course, the price is not cheap。]Excessive temperature：While the institution is operating，The part where the bearing is installed is allowed to have a certain temperature，When touching the body shell with the hand，It should be normal not to feel hot，Otherwise, the bearing temperature is too high。 IKOImported bearing[Imported bearing:Simply put, the import bearing agent is engaged in an import shaft
2015-03-04 Reading quantity 1543
introduction： TIMKENImported bearing[Imported bearing:Simply put, the import bearing agent refers to the sale of an imported bearing brand。The main brands of imported bearings arenskbearing，ikobearing，fagbearing，Of good quality，Of course, the price is not cheap。]During installation，If the manner or method of installation is improper，Will causeTIMKENImported bearing[Imported bearing:Simply put, the import bearing agent refers to the sale of an imported bearing brand。The main brands of imported bearings arenskbearing，ikobearing，fagbearing，Of good quality，Of course, the price is not cheap。]in
2015-03-04 Reading quantity 1452
introduction： With drill（See woodworking tool）Woodworking machine for machining through or blind holes in workpieces。The woodworking drilling machine is horizontal and vertical,Uniaxial and multiaxial,Mainly used for wood drilling、Machining dowel holes and repairing knots, etc。The structure of the vertical single-spindle woodworking drilling machine is similar to that of the metal cutting vertical drilling machine，The drill bit is held on the drill clamp at the lower end of the spindle，It is rotated by an electric motor，The workpiece is placed on the work table，Manual or automatic feed is available。Multi-spindle woodworking drilling machine（See picture[Multi-spindle woodworking drilling machine]）Dowel holes for processing panel furniture，There are single rows and multiple rows。Each row of drill shafts is driven by a separate motor through a gear，The center distance of drill shaft is32milli
2015-03-04 Reading quantity 2791
introduction：1、An oil seal with a spring in the main lip，Rely on sealing edge to prevent leakage when applied unilaterally。 Working condition： a.Rotational speed: 0～25m/s b.Working pressure: 0～0.05Mpa c.Operating temperature: -35～120℃ d.Sealing medium: Lubricating oil、grease、Water dispatching 2、Oil seal with lip spring，Use the main lip to prevent leakage，The secondary lip protects against dust、Apply when water enters。 Working condition： a.Rotational speed: 0～25m/s b.Working pressure: 0～0.05Mpa
2015-03-04 Reading quantity 1542
introduction：（1）well-adapted，It has high and low temperature performance，Both indoors and out、Common to the north and south。 （2）lubricity、Good wear resistance，oil-tight、Not dry up、non-emulsifying、Not lose、The grease itself should not contain solids。 （3）Good antioxidant properties，After long-term use，Appearance color of grease、The pH change is small，There was no obvious oxidation。 （4）Good liquidity，It is generally required to use the temperature-25°C—120°C，Small starting torque，Low running torque，Low power consumption，Low temperature rise。 （5）Rust resistance、Strong anti-salt spray ability，Good water resistance，Suitable for harsh working environments。
2015-03-04 Reading quantity 1535
introduction：Usually we useFAGNon-standard bearing[bearing:bearing（“Bearing”，Japanese person“Axial receptor”）It is a part that holds and reduces the friction coefficient of load during mechanical transmission。Can also be said，When other parts move relative to each other on the shaft，A device used to reduce the coefficient of friction during power transmission and to keep the center of the shaft fixed。]Is not paying attention to the point，This is easy to make our bearings not the best operating condition and the longest service life，Today we are going to introduce how to master these key points when using and how to detectFAGMethod of non-standard bearing clearance，
2015-03-04 Reading quantity 1536
introduction：In stamping production，Drawing and deep processing of wall parts without flanges is often encountered，If the shape of thin-walled parts is more complex，There are two main problems to be solved in die design：（1）The die cannot adopt the overall shape because of the discharge requirement，But because of the complexity of the beginning of the workpiece，The die needs to be machined in one piece，This contradiction should be taken into account in the design。（2）Allowance should be made for trimming due to deep drawing，Therefore, there should be a cutting process after deep drawing，Whether machining with a special fixture on the lathe or leaving the edge for final grinding，Its all about efficiency，Easy to damage the shape of the workpiece and other problems。 Manufactured by our factoryYJH256Torque converter pump wheel outer ring
2015-03-03 Reading quantity 2779
introduction：ABS Burn easily Yellow flame smokeless AS Id. Id. Thick black smoke PE Id. Yellow below and blue above Top blue PP Id. Id. Small amount of black smoke PS Id. orange Thick black smoke，Charcoal ash PC Slow burning yellow Id.
2015-03-03 Reading quantity 2893
Complete category
Save worry and effort，Buy all at one stop
One-to-one customer service
Selection inquiry，Fast response
Delivery guarantee
Multi-position straight hair，No worries about delivery
Source of genuine goods
Genuine guarantee，Honest service
Source of genuine goods
Genuine guarantee，Honest service
Automatic parts one-stop procurement platform
Working hours：Monday to Saturday 8:30-18:00
008618117444109
Official wechat public account
Order for goods/Information at hand
